HydroLogic Hydroid, Руководство пользователя

Страница: 17 / 38

Hydroid
– Series User Manual
17 04/19
Operating Do's and Don'ts
DO
•
Change the carbon pre-filter regularly.
•
Monitor the system and keep a regular log.
•
Run the system at least every 48 hours for one hour or more.
•
Always feed the pump with pre-filtered water.
DON’T
•
Permit chlorine to enter the feed water (change carbon pre-filter every 75,000 gallons).
•
Shut down the system for extended periods (see manual page 25).
•
Operate the system with insufficient feed flow or pressure.
•
Operate the pump dry.
TO MAINTAIN PROPER PRESSURE, MAXIMUM HORIZONTAL TUBING
DISTANCE TO TANK STORAGE IS 50FT. IMPORTANT! FOR EVERY 5FT
VERTICAL HEIGHT, YOU NEED TO SHORTEN TUBING BY 10FT OF
HORIZONTAL LENGTH.
EXAMPLE: IF TUBING NEEDS TO BE INSTALLED 10FT
OFF THE GROUND, TOTAL HORIZONTAL LENGTH MAY NOT EXCEED 30FT.
IF LENGTH EXCEEDS SPECIFICATIONS, PLEASE CONTACT HYDROLOGIC
888-426-5644
USING THE REVERSE OSMOSIS SYSTEM OPERATION LOG PROVIDED ON
PAGE 24 OF THE USER MANUAL, RECORD YOUR
SYSTEM’S READING
DAILY FOR A WEEK. AFTER A WEEK, RECORD THE READINGS AT A MINIMUM OF
ONCE A WEEK. IT IS SUGGESTED TO MAKE SEVERAL COPIES OF THIS SHEET FOR
FUTURE USE BEFORE RECORDING INITIAL READINGS. KEEPING AN OPERATION
LOG IS IMPORTANT TO TROUBLESHOOT POSSIBLE TECHNICAL ISSUES.