HydroLogic EvolutionRo, Руководство пользователя

Страница: 11 / 16

10
Do not bring unit back to the dealer, contact
HydroLogic directly for questions and warranty
issues. We can quickly assist you by phone.
A one-year warranty against manufacturer’s defects comes with each unit.
These
defects must be reported to Hydrologic upon receiving the merchandise, when the box is opened,
or immediately thereafter. For other issues that may arise throughout the lifetime of the product,
please contact HydroLogic directly for technical support.
This does not include clogged or damaged pre-filters or RO membranes due to
lack of regular maintenance or excessive sediment, chlorine, chloramines, iron,
silica, manganese, sulfur, or PPM in the source water.
This warranty also excludes
damage caused by using the unit outside of the specified operating parameters listed on page 8.
Do not operate unit if incoming pressure exceeds 80 psi or there is problem with water hammer or
pressure spikes.
The manufacturer believes the information and data contained herein to be accurate and useful. The
information and data are offered in good faith, but without guarantee, as conditions and methods
of use of products are beyond the manufacturer’s control. The manufacturer assumes no liability
for results obtained or damages incurred through the application of the presented information and
data. It is the user’s responsibility to determine the suitability of the products for the user’s specific
end uses.
Tech Support Contact:
techsupport@hydrologicsystems.com
1-888-426-5644
Visit us on the web at: www.hydrologicsystems.com. There are a variety of
videos under the resources tab.
WARNING: USING NON-HYDROLOGIC REPLACEMENT
FILTERS OR MEMBRANES WILL VOID THE WARRANTY
WARRANTY AND SUPPORT