Hydro Smart 115 PLUS, Инструкция по установке и руководство пользователя

Страница: 40 / 49

40
GENERAL
TROUBLESHOOTING
PROBLEM SOLUTIONS
TEMPER
ATURE
and
AMOUNT
OF
H
O
T
W
ATER
It takes a long time to
get hot water at the
fi xtures. (DHW with
Radiant Heating)
The water is not hot
enough.
• The time it takes to deliver hot water fr om the boiler to your
fi xtures depends on the length of piping between the two. The longer
the distance or the bigger the pipes, the longer it will take to get hot
water.
The water is too hot. • Is the set t empe rature set too high?
The hot water is not
available when a
fi xture is opened.
(DHW with Radiant
Heating)
• Compa re the fl ow and t empe rature.
• Check cross plumbing between cold water lines and hot water lines.
• Is the gas supply valve fully open?
• Is the gas line sized properly?
• Is the gas supply pressure within specified limits?
• Is the set t empe rature set too low?
The hot water turns
cold and stays cold.
• Make sure the unit has 120 VAC, 60 Hz power supply.
• Is the power bu tt on on the controller or inside the boiler turned
on?
• Is the gas supply valve fully open?
• Is the water supply valve fully open?
• Is the fil ter on the system clean ?
• Is the hot water fi xture su fficie ntly open to draw at least 0.5 GPM
(1.9 L/min) through the boiler?
• Is the unit frozen?
• Check for cross plumbing between the hot and cold water lines.
Fluctua tion in hot
water t empe rature.
• Is the fl ow rate enough to keep the boiler running?
• Is the gas supply valve fully open?
• Is the fil ter on the system clean?
• Are the fi xtures clean of debris and obs tructions?
• Is the fil ter on the system clean?
• Is the gas line sized properly?
• Is the supply gas pressure within specified limits?
• Check for cross c onnection between cold water lines and hot water lines.