Hydro International Hydro-Logic Flexi Logger 300Ex, Руководство пользователя

Страница: 59 / 74

Hydro-Logic
®
Flexi Logger 300Ex
User Manual
22 August 2018 Page 59 of 74
Groups and recipients
The logger calls Timeview when it detects an alarm condition. It does not contact
alarm recipients direct. Timeview does that via the Groups and Recipients page
(1). Create a New Message Group, here called Temperature test:
Then select Recipients and add the names and either email addresses or SMS
mobile numbers. You can add many recipients to each group.
Note that SMS messages are charged, and you must have credits for them on
your Timeview account. Contact
Sales enquiries to arrange this.
Message contents
The alarm call from the logger contains the channel number, set point and
direction of the alarm (set, or return to normal). It does not contain descriptive
information about what the alarm means. Timeview adds this information via the
Message Contents page (1). Add a new message relevant to your alarm set
point
– here, “Probe too warm”.