Hydro International Hydro-Logic Flexi Logger 300Ex, Руководство пользователя

Страница: 39 / 74

Hydro-Logic
®
Flexi Logger 300Ex
User Manual
22 August 2018 Page 39 of 74
Basic configuration
Harvest can be used to change logger parameters using the same method as
Resetting the logger clock with Harvest
The parameters are grouped into tabs in the configuration box. The frequently
used ones are described here, the rest are in the separate Harvest manual
available from our
Support website .
Logger Group and Tag
This is an information tab about the way the logger is configured and operating.
You can also set the Group (1) and Tag (2) here. These values are important for
identifying your site on Timeview. The supply current (3) is also shown here,
which is useful for
Estimating battery life .
If you change the Group and Tag of the logger, it will start recording a new data
series on Timeview. You should download and save any old data before you do
this.