Hydro International Hydro-Logic Flexi Logger 300Ex Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 74

background image

Hydro-Logic

®

Flexi Logger 300Ex

User Manual

22 August 2018

Page 35 of 74

Configuration with Harvest Software

This is a limited guide on connecting the logger to Harvest. Further information is
available in the Harvest Software Advanced User Manual, which can be
downloaded from the

Support website

Harvest overview

Harvest software is used to read and configure the range of Hydro-Logic

®

Flexi-

Logger devices. It is also used to export and manage data retrieved from these
devices.

Harvest software is available in two versions

•

Harvest for Windows based PCs

•

Pocket Harvest for Windows Mobile based devices

You can download Harvest Windows software free of charge from our

Install Harvest using the default options. If you have an older version of Harvest
on your PC, you should install the newest version. Harvest supports older logger
versions, but new loggers will not work with old versions of Harvest.

Connecting the device

To read or configure the Hydro-Logic

®

Flexi Logger 300Ex locally with a Windows

PC you will need a copy of Harvest software and a serial communications cables
part no

PDA1100.3435

.

The serial communications port on the Flexi Logger 300Ex is certified as
“Intrinsically Safe” (IS). This allows serial data connection to be made to the
logger without removing the logger from a hazardous area, but requires the
connection to the laptop, tablet, PDA to be made in the safe area.

Under NO circumstance should the serial connection be made in the hazardous
area or the data collection device (laptop, tablet, PDA) be taken into the
hazardous area.

Connect your serial cable to your PC and to the comms connector on the logger.
Ensure the screw collar on the cable is not left loose or the pins may not connect.

«
...
33
34
35
36
37
...
»

Содержание Hydro-Logic Flexi Logger 300Ex











































































Отзывы:

Нет отзывов

Похожие инструкции для Hydro-Logic Flexi Logger 300Ex

Бренд: Omega Страницы: 4

Бренд: MadgeTech Страницы: 12

Бренд: SS Telecoms Страницы: 16

TorqueStar Plus

Бренд: Crane Electronics Страницы: 41

Бренд: Dwyer Instruments Страницы: 2

Бренд: Dwyer Instruments Страницы: 2

Бренд: Dwyer Instruments Страницы: 4

Бренд: Race Technology Страницы: 8

Powador-miniLOG

Бренд: Kaco Страницы: 33

Бренд: Racelogic Страницы: 71

Бренд: Keelin Страницы: 19

Бренд: PASCO Страницы: 4

Бренд: SS Telecoms Страницы: 19

Бренд: Furuno Страницы: 2

Бренд: Extech Instruments Страницы: 11

Бренд: Campbell Страницы: 32

OM-EL-WiFi Series

Бренд: Omega Страницы: 2

EasyLog EL-WiFi Series

Бренд: Lascar Electronics Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды