Cleaning Information
-
3-2
Steamatic 8800 TMU
preCautIonS
The use of some chemicals (such as concentrated acids and/or solvents) in your
truckmount can seriously damage the internal plumbing and high pressure pump.
The manufacturer strongly recommends purchasing a water softener system to prevent
the buildup of scale and hard water deposits in your truckmount.
The manufacturer recommends only the use of chemicals containing rust and corrosion
inhibitors and water softening agents to prevent chemical buildup which may lead to
component failure and warranty invalidation.
Increased demand for a neutralizing rinse results in the need for special care when using
these acid based chemicals in your truckmount The negative side of these products is the
corrosive effects the acid can have on metals, including fittings, pumps, heat exchangers,
etc.
The manufacturer’s
ClearWater Rinse™
has been formulated to protect vital components.
The manufacturer will not warranty parts that have been damaged from using acid products
that have obviously caused failures.
preparIng tHe Carpet for extraCtIon
pre-vacuum the carpet
Whether you instruct the customer to pre-vacuum or you offer it as part of your service,
proper vacuuming will make your job easier with superior end results. The more time
spent removing loose particulate soil, the easier it will be to remove the oily soil stuck to
the fibers.
pretreat the carpet
This process of applying traffic lane type chemicals to the carpet (whether by sprayer or
rotary scrubber) is essential prior to extraction with your truckmount.
by applying cleaning agents to the carpet and letting them dwell 10-20 minutes prior to
rinsing, you allow the product to dissolve and emulsify the oily, sticky binders holding the
soil to the fiber. This will allow more soil to be removed in one or two cleaning passes and
help prevent over-wetting.
Remember the solution coming out of your cleaning tool is only in contact with the carpet
fiber for a few seconds. Relying on the rinse detergent to do the majority of the cleaning
will result in overly long dry times and excess detergent residue left in the carpet.
The manufacturer recommends the use of our pre-sprays:
Fastbreak™
for residential
carpet and
Blitz™
for commercial carpet needs.
Содержание Steamatic 8800 TMU
