manualshive.com logo in svg

HydraMaster CDS 4.6, Руководство пользователя, Страница: 125 / 126

Поделиться
Скачать
HydraMaster CDS 4.6 Скачать руководство пользователя страница 125

   Warranty Information:  12-2

vACUUM AND SOLUTION HOSES 

failure to protect hoses against freezing.  

• 

failure to protect hoses against burns from engine and blower exhaust. 

• 

Damage to hoses from being run over by vehicles.  

• 

Kinking or cracking from failure to store or unroll hoses correctly. 

• 

Normal wear and tear from everyday use.

• 

CLEANINg WAND AND TOOL

failure to protect against freezing.  

• 

obvious physical abuse of wand or tool. 

• 

WATER HEATINg SYSTEM

over-pressurization  of  the  system  (recommended  maximum  working

• 

  pressure  - 

1,200 psi)

.  

failure to protect against freezing.

• 

HARD WATER DEPOSITS

failure to use or maintain a water softening system or a properly installed magnetic-

• 

type descaler, whichever might be necessary, with machines operating in designated 

“Hard Water Areas” (3.5 grains or more per gallon).

WARRANTY PROCEDURE

Warranty  coverage  is  available  to  you  through  your  local  distributor.  Please  refer  to 

the Golden Guarantee© limited Warranty document shipped to you with the owner’s 

Guide.

If you have moved to a new area or have purchased a used machine and need information 

regarding your local distributor, call HydraMaster at (425) 775-7272 or email us at:

[email protected].

When calling your distributor, be sure to have the machine’s information; model and serial 

number, ready for the service representative. 

FOR YOUR REFERENCE:

Model No. _____________________________________________________
Serial No.  _____________________________________________________
Date of Purchase:  ______________________________________________
Purchased From (Distributor): ____________________________________

Содержание CDS 4.6































































































































Отзывы:

Нет отзывов