manualshive.com logo in svg

HydraMaster CDS 4.6, Руководство пользователя, Страница: 121 / 126

Поделиться
Скачать
HydraMaster CDS 4.6 Скачать руководство пользователя страница 121

   Machine Maintenance:   10-8

4.0. System attains normal heat but drops off sharply

4.1. Solution flow at cleaning 

tool is too high. Orifice in tool 

is too large or worn out. 

Test flow of tool. Repair or replace as necessary.

4.2. The rpm of machine is 

set too low.

Adjust as necessary.

4.3. Recirculation orifice 

plugged, giving incorrect 

reading at gauge.

Clean filter screen and inspect orifice. Clean or replace 

as necessary.

4.4. Cleaning solution 

pressure is too high.

Adjust pressure to normal. Inspect pressure gauge for 

accurate reading.

4.5. Hard water deposits are  

in the system.

Descale system as directed in this owner’s Manual 

(see 

Perform Descaling As Required

 subsection).

MISCELLANEOUS

1.0.  Vehicle radiator overflows into coolant overflow container while machine is 

in use.

1.1. Internal leak in coolant 

heat exchanger.

Pressure  test  each  heat  exchanger  separately  to 

determine which heat exchanger is faulty. This process 

requires  heated  water  and  high  pressure  to  simulate 

the same conditions that are causing the leak. Refer to 

qualified service technician if necessary.

Содержание CDS 4.6































































































































Отзывы:

Нет отзывов