HydraMaster BoxxerXL, Руководство пользователя

Страница: 48 / 144

Machine Maintenance: 5-2
OperatIOnaL MaIntenanCe
Daily Maintenance
• Check the engine oil level. Add oil if needed.
• Check the high pressure pump oil. Add oil if needed.
• Check the oil level in the blower. Add oil if needed.
•
Inspect and clean the recovery tank filters.
• Inspect and clean the garden hose screen.
• Inspect the truckmount for water and oil leaks, loose electrical connections, etc. and
repair as needed.
• Lubricate the blower with a HydraMaster-recommended lubricant.
Weekly Maintenance
• Inspect the recovery tank filters for tears, holes, etc. Repair or replace as needed.
• Inspect the vacuum relief valve. Clean and lubricate as necessary.
• Clean the recovery tank thoroughly with pressure washer.
• Check the pump belts for wear and proper tension. Adjust as needed.
•
Check all the hoses and wiring for wear and chafing. Secure as needed.
• flush the water and chemical systems with solution of equal parts white vinegar and
water.
• Check all the nuts and bolts. Tighten as needed.
• One time change of the high pressure pump oil after 50 hours of operation. (every 500
hours thereafter.)
• One time change of the engine oil after 8 hours of operation.
• Change the engine oil every 50 hours. (every 25 hours if operating in high ambient
temperatures.) Change oil filter every oil change.
• Check the engine valve clearance (intake and exhaust 0.004” - 0.006” [0.101 mm -
0.152 mm]) after first 50 hours and every 250 hours after that.
Monthly Maintenance
• Check the engine air filters. Clean or replace as necessary.
• Check the water level in battery. fill as needed.
• Clean the battery terminals as needed.
Quarterly Maintenance
• Check the fuel lines. Repair or replace as needed.
• Clean and gap the spark plugs to 0.030” (0.76 mm). Replace if excessive carbon
buildup is visible.
• Change the blower oil after first 100 hours of use.