manualshive.com logo in svg

HydraMaster Boxxer 318HP, Руководство пользователя

Поделиться
Скачать
HydraMaster Boxxer 318HP Скачать руководство пользователя страница 9

1-1:  General Information

1- General Information

The Boxxer 318HP is a carefully engineered truckmount designed and manufactured by 
HydraMaster for hard surface cleaning as well as carpet and upholstery cleaning. The 
Boxxer 318HP can also be used for high pressure washing applications.

The system utilizes an internal combustion engine to provide the power necessary to turn 
both a blower (also referred to as a vacuum pump) and a high pressure water pump.

The heat of the engine and blower exhausts is transferred to the high pressure water in 
the heat exchanger of the system.

Finally, the chemical is injected into the pressurized water stream and the heated solution 
is delivered to the cleaning tool.

The solution is recovered by the vacuum generated by the blower and is collected in the 
recovery tank for proper disposal.

It is the purpose of this manual to help the technician properly understand, maintain and 
service the truckmount. By following these guidelines carefully, you can expect years of 
reliable operation.

This section contains the following helpful information:

 

„

Contact Information

 

„

Warnings, Cautions and Notices

 

„

Responsibilities 

 

„

Machine Specifications

 

„

High Altitude Operation 

 

„

Local Water Precautions

Содержание Boxxer 318HP





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды