Preparing the unit for operation
OFX
en(us)
Page 27 / 52
BeWa OFX 3796731 en-us 2014-03-31.doc
2014-03-31
Hanging the suction hose
NOTICE
Danger due to severe contamination in the fluid / on the bottom of
the tank.
The unit will be destroyed
►
Never prime without a built-in suction screen.
►
Do not prime directly at the bottom of the tank.
►
Do not prime in the sump.
The greatest contamination is found on the bottom of the tank.
All impurities and other particles are deposited on the bottom of
the tank.
Put the suction hose with lance, without tension and or twist, into the
appropriate tank. Secure the suction hose so that it cannot fall out our float.
Connecting pressure hose to high-pressure port
Connect the pressure hose (4.1) to the hydraulic system to be filled.
Connecting pressure hose to depressurized tank
Put the pressure hose (4.1), without tension or twist, into the appropriate
depressurized tank. Secure the suction hose so that it cannot fall out our
float.
Prevent aeration of the medium by fully immersing the lance in
the medium.
Make sure that the lance is always below the oil level in
operation.
