Hydac MRF7 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 32

Hydac MRF7 Скачать руководство пользователя страница 6

MRF7

Preface

HYDAC FILTER SYSTEMS GMBH

en(us)

Page 6 / 32

MoWa MRF7 3635531 en-us 2011-05-25.doc

2010-05-25

Customer Service

Contact our technical sales department if you have any questions on our product.
When contacting us, always include the model/type designation, serial no. and part-
no. of the product:

Fax:

++49 (0) 6897 / 509 - 846

E-Mail: [email protected]

Modifications to the Product

We would like to point out that changes to the product (e.g. purchasing options, etc.)
may result in the information in the operating instructions no longer being completely
accurate or sufficient.

When making modifications or performing repair work to components affecting the
safety of the product, the product may not be put back into operation until it has
been examined and released by a HYDAC representative.

Please notify us immediately of any modifications made to the product whether by
you or a third party.

Warranty

For the warranty provided by us, please refer to the General Terms of Sale and
Delivery of HYDAC FILTER SYSTEMS GmbH.

They are available at: www.hydac.com -> Legal information.

«
...
4
5
6
7
8
...
»

Содержание MRF7

































Отзывы:

Нет отзывов