background image

HYDAC FILTER SYSTEMS GMBH

Glossary

BeWa MFU-15E_S 4391552d en-us print

115 / 120

property and environmental con-
tamination that can result from im-
proper use.

PVC

Polyvinyl chloride is a thermoplastic
polymer. As a spiral hose made of
transparent PVC, with spirals made
of galvanized spring steel and
smooth on the inside and outside.
Temperature range -15°C to +60°C.

Specialist personnel - Electrical

Such persons have specific special-
ist training and several years' work
experience. They are able to as-
sess and perform the work as-
signed to them, they are also able
to recognize potential dangers.

Specialist personnel - General

Such persons have specific special-
ist training and several years' work
experience. They are able to as-
sess and perform the work as-
signed to them, they are also able
to recognize potential dangers.

Specialist personnel - Mechanical

Such persons have specific special-
ist training and several years' work
experience. They are able to as-
sess and perform the work as-
signed to them, they are also able
to recognize potential dangers.

Specialist personnel - Service /

Administrator

Such persons have extensive spe-
cialist training as well as several
years' work experience and have
been trained on the product by HY-
DAC or an authorized service part-
ner. They are able to assess and
perform all the tasks with regard to
the product and detect possible
dangers.

Содержание MFU-15E

























































































































Отзывы: