MCS 1000 Series
Servicing the MCS
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 61 / 76
BeWa MCS1000 3435427f V130 en-us 2012-06-15.doc
2012-06-15
Servicing the MCS
The MCS is maintenance-free:
Decommissioning MCS
To decommission the unit, proceed as follows:
1. Remove the electric plug.
2. Depressurize the unit.
3. Remove the connected hoses/piping from the MCS.
4. Remove the MCS from the cable / from the component.
Disposing of MCS
Dispose of the packaging material as appropriate for your area.
When decommissioning and/or disposing of the MCS, observe all local guidelines
and regulations pertaining to occupational safety and environmental protection. This
applies in particular to the oil contained in the unit, to components coated in oil and
to electronic components.
After disassembling the unit and separating the various materials, reuse them or
dispose of them properly in accordance with local regulations.
