Maintenance and Servicing Manual
FAM 200 FluidAqua Mobil
•
Make sure that the pumps have been switched off when working on piping, hose lines, and
fittings containing or conveying fluids or vapors. The piping, hose lines and fittings must be
allowed to cool completely and depressurize. The shut-off valves upstream and downstream of
the above conduits and fittings have to be closed and secured again being inadvertently
opened. If possible, the medium is to be drained.
•
After cleaning check all the piping, hose lines, and fittings for leakage, loose connections,
places subjected to undue abrasion or other damage. Remedy any leakage, abrasion or loose
connections immediately.
•
Make sure to tighten any screwed fittings which might have come loose during maintenance
and repair work.
•
In the event that safety equipment needs to be removed during maintenance, cleaning or repair
work, be sure to install the equipment back in place and check that it is perfect working order
when work is completed.
2.2
Training and Instruction of Personnel
•
The FAM may only be operated by properly trained and instructed personnel.
•
The areas of responsibility of your staff must be established in a clear-cut manner.
•
Staff undergoing training may not use the FAM unless supervised by an experienced staff
member.
HYDAC Filtertechnik GmbH
en
Page 10
IuW FAM200 3373093a en.doc
2007-09-25
Individuals
Activity
Individuals
undergoing
training
Individuals with
technical
training/
engineering
background
Qualified
electrician
Supervisor
with the
appropriate
authority
Commissioning
X
X
X
Operation
X
X
X
X
Troubleshooting/
locating the
source of
malfunction
X
X
X
Troubleshooting,
mechanical
problem
X
X
Troubleshooting,
electrical problem
X
X
Maintenance and
servicing
X
X
X
X
Repair work
X
