Hydac Filtromat OF5 C with FCU Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 44

Hydac Filtromat OF5 C with FCU Скачать руководство пользователя страница 20

Preparing the unit for operation

Filtromat – OF5 C with FCU

en(us)

Page 20 / 44

BeWa OF5C 3160333b en-us 2014-07-28.doc

2014-07-28

Preparing the unit for operation

NOTICE

Damaged/brittle hoses

Leakages in the hose/fluid may escape

►

Before start-up, always check the hoses for damage/brittleness.

Prior to start-up, check to see whether there is a filter element in the filter
housing. You can find details on inserting the filter element on page 30.

Hanging/connecting the suction hose

NOTICE

Severe contamination

The unit will be destroyed

►

Do not prime directly at the bottom of the tank/in the sump.

The greatest contamination is found on the bottom of the tank. All
impurities and other particles are deposited on the bottom of the tank.

Pull the suction hose (thick hose) with lance out of the mounting in the floor
plate.
Using the lance, put the suction hose into the appropriate reservoir without
tension or twist, and secure the suction hose against falling out or floating.

«
...
18
19
20
21
22
...
»

Содержание Filtromat OF5 C with FCU













































Отзывы:

Нет отзывов