Preparing the CTM-EF for operation
CTM-EF 1x3x Series
en
Page 26 / 52
BeWa CTM-EF 1x3x 4365310 en-us 2018-06-06.docx
2018-06-06
Preparing the CTM-EF for operation
Positioning the CTM-EF
The CTM-EF can be moved into the required location on its own casters. The
CTM-EF has 4 casters. Before pushing, release the hand brake on the
casters.
When you have positioned and aligned the CTM-EF, set the brakes on the
casters.
Make sure that the CTM-EF is on a level, horizontal surface, to the right next
to the CTM SC.
Make sure that the installation location provides proper laboratory conditions
with appropriate cleanliness and temperature of the air and environment.
CAUTION
"G60 Spezial" test liquid
Health hazard
►
Make sure that there is adequate ventilation.
►
Always wear protective gloves.
►
Always wear eye protection.
