General
CSI-Connect
Edition 2021-14-10 - V01 R08
3
/
23
Part No.: 4576597
This manual was created for the following target group.
Target group
Tasks
Owner
This manual and the associated documents must be kept accessible at the
installation location and for later use.
Ask the employees to read and follow the manual and the associated
documents, in particular the safety and warning instructions.
Observe the additional product-related instructions and requirements.
Specialist
personnel
Read, observe, and follow this manual and the associated documents, in
particular the safety and warning instructions.
Table 3: Target group
Persons who work on the equipment must be aware of the hazards associated with its use.
These operating instructions are intended for:
Auxiliary personnel:
Such persons have been instructed about the sensor and informed
about potential hazards that can result from improper use.
Specialist personnel:
Such persons have corresponding specialist training and several years'
work experience. They can assess and perform the work assigned to
them; they are also able to recognize potential dangers.
Life phase
Person
Required knowledge
Transport / Storage
Auxiliary Personnel
No specialist knowledge required.
Electrical installation,
commissioning,
troubleshooting,
decommissioning
Specialist electrician
Safe handling/use of tools.
Fitting and connection of electrical lines.
Knowledge of network communication.
Knowledge of using Windows PCs and of
program installation.
Product-specific knowledge.
Operation, operations
control
Specialist
Knowledge of using Windows PCs/mobile end
devices.
Product-specific knowledge.
Dismantling disposal
Specialist
Proper and environmentally friendly disposal
of materials and substances.
Knowledge about reuse.
Table 4: Required qualifications/training
You will find illustrations in this manual. You can find details regarding these in the following
chapters.
Please note that you can directly access information through the directories.
However, this does not release you from the obligation to read this manual fully
before commissioning.
The document no. with the index (4) is meant for identifying and reordering the manual. The index is
incremented every time the manual is revised or changed.
The manual contains a table of contents, a list of tables and figures, an index, and a glossary.
