HYDAC International MRF 2 NU, Инструкция по эксплуатации и техническому обслуживанию

Страница: 8 / 20

MRF 2 NU MultiRheo Filter
1.2.1 Basic Symbols
This symbol designates safety instructions whose non-observance may
pose a hazard to individuals.
This symbol designates safety instructions whose non-observance may
result in the injury of individuals by electric shock.
This symbol designates safety instructions whose non-observance may
pose a hazard to individuals working on the pressurized system or its
components.
This symbol provides important instructions and tips for the proper
handling and operation of the MRF.
Non-adherence to these instructions may result in damage to the MRF or
in damage to its immediate surroundings.
This symbol designates tips for usage and other particularly useful
information.
This information helps you to optimally utilize all the features offered by
your MRF.
1.3 Proper/Designated Use
The MultiRheoFilter (MRF) is a stationary filtration unit used for the full-flow and bypass
filtration of low-viscosity fluids.
Any use deviating from what is specified herein shall constitute improper use.
The manufacturer will assume no liability for any loss or damage as the result thereof.
Proper or designated use of the MRF extends to the following:
•
Maintaining adherence to all the instructions contained herein.
•
Performing requisite inspection and maintenance work.
1.4 Improper Use
Any use deviating from the proper/designated use described above is prohibited.
Improper use may result in hazard to life and limb.
1.5 Safety Devices and Equipment
Prior to starting up the filter unit each time, make sure that all the protective safety devices
are properly installed and are in proper working order.
HYDAC Filtertechnik GmbH
en
Page 8
BeWa MRF2NU 3341025 en.doc 2007-09-24