FluidMonitoring Module High
Pressure
General Safety Precautions
HYDAC Filter Systems GmbH
en
Page 8 / 28
BeWa FMMHP 3386918a en 2009-06-08.doc
2009-06-08
General Safety Precautions
These operating instructions contain the key instructions for properly and safely
operating the FMMHP.
Obligations and Liability
The basic prerequisite for the safe and proper handling and operation of the
FMMHP is knowledge of the safety instructions and warnings.
These operating instructions in general, and the safety precautions in particular, are
to be adhered to by all those who work with the FMMHP.
Adherence is to be maintained to pertinent accident prevention regulations
applicable at the site where the product is used.
The safety precautions listed herein are limited solely to using the FMMHP.
The FMMHP has been designed and constructed in accordance with the current
state of the art and recognized safety regulations. Nevertheless, hazard may be
posed to the life and limb of the individual using the product or to third parties.
The FMMHP is to be used as follows:
•
solely for its designated use
•
only when in a safe, perfect condition
any faults or malfunctions which might impair safety are to be properly repaired or
remedied immediately.
Our General Terms and Conditions apply. They are provided to the owner upon
conclusion of purchase of the unit at the latest. Any and all warranty and liability
claims for personal injuries and damage to property shall be excluded in the event
they are attributable to one or more of the following causes:
•
Improper use of the FMMHP or use deviating from its intended use
•
Improper assembly/installation, start up, operation and maintenance of the
FMMHP
•
Modifications to the FMMHP made by the user or purchaser
•
Improper monitoring of unit components that are subject to wear and tear
•
Improperly performed repair work
Explanation of Symbols and Warnings, etc.
The following designations and symbols are used in this manual to designate
hazards, etc.:
