HYDAC International FMM-O-M, Инструкция по установке и обслуживанию, Страница: 11 / 28

FluidMonitoring Module – FMM-O-M Safety Information and Instructions
HYDAC FILTER SYSTEMS GMBH en(us) Page 11 / 28
MoWa FMM-O-M 3492448a en-us 2010-12-15.doc 2010-12-15
Training and Instruction of Personnel
The FMM may only be operated by properly trained and instructed personnel.
The areas of responsibility of your staff must be established in a clear-cut manner.
Staff undergoing training may not use the FMM unless supervised by an
experienced staff member.
Individuals Personnel undergoing training P
ersonne
l w
ith
technical training/ engineering background Electrician Supervisor with
the
appropriate authority
Activity
Packing
Transportation
X X X
Commissioning X X X
Operation X X X X
Troubleshooting/
locating the source of malfunction
X X X
Remedying of mechanical faults
X X
Remedying of electrical faults X X
Maintenance X X X X
Repair work X
Decommissioning/storage X X X X
Maintenance, Servicing and Troubleshooting
The prescribed adjustment, maintenance/servicing and inspection work is to be
conducted in a timely fashion.
Disconnect the FMM from the power supply and protect the entire system from
being inadvertently switched on when performing maintenance, inspection or repair
work.
Check any screwed fittings which have been removed to see that they have been
properly secured.
Always check the product to see that it functions properly when performing
maintenance and servicing work.