HYDAC International ALPC 9000 Series, Инструкция по эксплуатации и техническому обслуживанию

Страница: 62 / 68

ALPC 9000 series Spare Parts List
HYDAC FILTER SYSTEMS GMBH
en
Page 62 / 68
BEWA ALPC9000 3601005 en 2011-04-07.doc 2011-04-06
Spare Parts List
Use only original spare parts to ensure safe operation of the attachment.
When ordering spare parts, always indicate the unit designation (type, material no.,
serial no., year of manufacture).
Spare Parts
Description P/no. Qty.
Prefilter cartridges, 5 µm (maintenance unit) 6003897 1
Fine filter cartridges, 1 µm (maintenance unit) 6029421 1
Silencer (maintenance unit) 6006823 2
Suction screen on suction hose 3524412 1
Sealing disk on vacuum hand 3092667 2
Vacuum hose, exchange set,
consisting of :
- 2x vacuum hoses on robot
- 1x silencer 3600716 1
O-ring on the pressure dome 685498 1
Disposing of the ALPC
When decommissioning and/or disposing of the unit, observe all local guidelines
and regulations pertaining to occupational safety and environmental protection. This
applies in particular to the analysis fluid in the unit, components covered with oil and
electronic components.
After disassembling the unit and separating the various materials, reuse them or
dispose of them properly in accordance with local regulations.
Calibrating the ALPC
We recommend a recalibration through one of the stated service facilities each year.