HYDAC FILTER SYSTEMS MRF 3, Инструкция по эксплуатации и техническому обслуживанию, Страница: 9 / 32

MRF 3 Safety information and instructions
Explanation of Symbols and Warnings
The following designations and symbols are used in this manual to designate
hazards, etc.:
DANGER
DANGER denotes situations
which can lead to death if
safety precautions are not
observed.
WARNING
WARNING denotes situations
which can lead to death if
safety precautions are not
observed.
CAUTION
CAUTION denotes situations
which can lead to severe
injuries if safety precautions
are not observed.
NOTICE
NOTICE denotes situations
which can lead to property
damage if safety precautions
are not observed.
Proper/Designated Use
The MultiRheoFilter (MRF) is a stationary filtration unit used for the full-flow and
bypass filtration of low-viscosity fluids.
Any other uses shall be deemed to be improper and not in keeping with the
product's designated use.
The manufacturer will not assume any liability for any damage resulting from such
use.
Proper or designated use of the product extends to the following:

Maintaining adherence to all the instructions contained herein.

Performing requisite inspection and maintenance work.
Improper Use
Any use deviating from the proper/designated use described above is prohibited.
Improper use may result in hazard to life and limb.
Safety Devices
Prior to starting up the product each time, make sure that all the safety devices are
properly fitted to the hydraulic system in which the product is to be used and are in
proper working order.
HYDAC FILTER SYSTEMS GMBH en Page 9 / 32
BeWa MRF3 3218003c en-us 2012-02-22.doc 2012-02-22