HYDAC FILTER SYSTEMS MRF 3, Инструкция по эксплуатации и техническому обслуживанию, Страница: 10 / 32

MRF 3 Safety information and instructions
HYDAC FILTER SYSTEMS GMBH en Page 10 / 32
BeWa MRF3 3218003c en-us 2012-02-22.doc 2012-02-22
Informal Safety Precautions
Make sure to always keep the operating instructions in the vicinity of the product.
In addition to the manual, the general and local regulations concerning accident
prevention and protection of the environment should be available and observed.
Make sure to keep the safety and hazard symbols and warnings on the product in a
legible condition.
Check the unit daily for leaking (perform a visual check). Any loose connections are
to be replaced immediately.
Training and Instruction of Personnel
The MRF may only be operated by properly trained and instructed personnel.
The areas of responsibility of your staff must be established in a clear-cut manner.
Trainees may only work with the MRF when supervised by an experienced
individual.
Individuals Individuals undergoing training Individuals with technical training Electrician Supervisor with
the
appropriate authority
Activity
Packing Transportation
X X X
Commissioning
X X X
Operation
X X X X
Troubleshooting / locating
the source of malfunction
X X X
Remedying faults
Mechanical
X X
Troubleshooting, electrical
problem
X X
Maintenance
X X X X
Repair work
X
Decommissioning/storage
X X X X
Safety Measures to Be Followed during Normal Operation
The product is to be checked at least once a day for external damage and the
proper functioning of the safety devices.