Hyd-Mech V18APC страница 30 Скачать руководство пользователя | Manualshive

Страница: 30 / 73

background image

2.7

PARAMETERS

The parameters can be accessed by pressing the service mode button on the panel. These parameters can be changed
without a password.

1. COOLANT ON WHEN BLADE RUN: __ / AND HD. AD

In Automatic Mode - Allows the coolant to flow whenever the blade is running or when the blade is running and the

head advances.

2. SHUTTLE LIFT: ON / OFF
ON allows the material to be lifted up and away to ensure it will not get caught when it is shuttled forward.

3. GUIDE ARM AUTOMATIC CONTROL: ON / OFF
ON (In Automatic Mode) – The user will be prompted to enter the material height before the cycle will start. This will
automatically position the guide arm a couple of inches above the material before every cut.

4. CHANGE DISPLAY MODE TO: METRIC / IMPERIAL
Toggle the display units between metric and imperial.

5. BLADE CHAMBER: ON / OFF
If Blade Chamber is on:

•

In the auto cycle, the head will make the cut and continue moving forward until it exits the material.

•

Shuttle will move the stock forward (by the distance set in the BLADE CHAMBER PUSH DISTANCE
parameter) and will push away the cut pieces.

•

Shuttle will move back allowing the head to retract.

•

Head will retract.

•

Shuttle will feed the next length to cut.

•

The cycle will repeat.

6. BLADE CHAMBER PUSH DISTANCE

This parameter defines the distance that the shuttle will move forward (behind the table) during the blade chamber

cycle.

7. BLADE CHAMBER PULL DISTANCE: # ----

This parameter defines the retract distance that the shuttle will move during blade chamber cycle.

8. CHIP CONVEYOR RUN TIME: # ----

This parameter defines the time that the chip conveyor will run after releasing the chip conveyor button. Chip con

-

veyor will run (extracting the chips) for that preset time (to the right on the left side infeed and to the left on the right
side infeed machines). This parameter is not functioning for the reverse mode. The conveyor will move in the reverse
direction only when the button is activated, and it will stop after the button is released.

«
...
28
29
30
31
32
...
»

Содержание V18APC










































































Отзывы:

Нет отзывов

Похожие инструкции для V18APC

Бренд: Ober Страницы: 32

Бренд: Sealey Страницы: 3

Бренд: Axminster Страницы: 17

Бренд: Panasonic Страницы: 11

Бренд: Panasonic Страницы: 15

EY4542 - CIRCULAR SAW 14.4V

Бренд: Panasonic Страницы: 15

Бренд: Panasonic Страницы: 116

Бренд: Panasonic Страницы: 220

Бренд: IGM Страницы: 96

Бренд: Milwaukee Страницы: 21

Бренд: Milwaukee Страницы: 37

Бренд: Milwaukee Страницы: 130

Бренд: Craftex Страницы: 35

Бренд: NUTOOL Страницы: 96

Бренд: Hitachi Koki Страницы: 76

Бренд: Baumr-AG Страницы: 19

Бренд: KRESS Страницы: 12

Бренд: KRESS Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды