Hyd-Mech V18APC, Руководство пользователя

Страница: 12 / 73

1.1
SECTION 1 - INSTALLATION
SAFETY PRECAUTIONS
All safety precautions must be observed during installation, operation, or repair work on the V18 APC bandsaw machine.
Inspect the machine thoroughly before power hook-up. Pay special attention to the electrical and hydraulic systems to
ensure no damage was caused in shipping.
Power hook-up should be performed by qualified personnel.
If not performing properly, the machine should be stopped immediately and set-up, or repaired by a qualified person.
Stock must not be loaded while the blade is running and the V18 APC should not be operated unless all guards, covers,
and doors are in place and closed.
Long and heavy stock should be supported where it extends off the saw table.
The operator should keep a safe distance from all moving parts especially the blade and operating vises.
Long hair, loose clothing, or gloves, should not be worn while operating the V18 APC.
The area around the machine should be kept clean and tidy.
The V18 APC machine should be used according to its specifications.
The operator must wear eye protection.
No modifications to the machine are allowed without Hyd·Mech Group Limited’s prior approval. Any approved
modifications shall be performed by trained personnel.