Hyd-Mech S-20 A, Руководство пользователя

Страница: 32 / 80

2.16
pulse per minute is optimum – more is not better.
Air Screw – regulates the jet of air that projects the lubricant from the nozzle onto the blade. Adjustment should
be such that lubricant covers the blade without blowing the mist beyond the back edge of the blade.
GUIDE ARM POSITIONING
The S-20/23A Series II guide arms are adjustable to accommodate varying material widths. The guide arms
should be adjusted as close to the material width as possible while still allowing the material to pass between
them. This process of matching the guide arm width to the material size is important to optimize blade life.
To adjust the guide arms the locking handles are loosened and then the guide arms will slide on the main guide
bar that holds them. To loosen the handle it should be turned counter clockwise and to tighten the handle, turn
it clockwise.
SHUTTLE LENGTH CONTROLS
An encoder in its housing is shown in
the photo. The PLC uses signals from
the encoder to maintain cut lengths.
CUTTING PARAMETERS CHART
A full size CUTTING PARAMETERS
CHART is mounted on the drive door of
WKHVDZ7KHFKDUWFRQWDLQV¿YHVWHSV
for the operator to follow in order to
achieve optimum performance of the
saw. Examples of the correct use of this
chart are on the following pages.
Locking Handles
Encoder Cover