Hybernite Superday ROC 2300, Инструкция по эксплуатации

Страница: 3 / 40

1. Warnings and Cautions
Usage:
• Do not cover the Heated Breathing Tube with
any object including cushions, blankets, a
textile insulation sleeve, a plastic sleeve, etc,
to avoid an elevated airflow temperature.
• Always use the Hybernite ROC System in
combination with humidification to avoid an
elevated airflow temperature.
• Always ensure that a positive airflow is
established through the Hybernite Heated
Breathing Tube prior to connecting the
power to the tube, to avoid an elevated air
temperature within the tube.
• Do not operate your Hybernite ROC System
close to other heat sources including lamps,
electric blankets, etc., to avoid an elevated
airflow temperature.
• Do not use the Hybernite ROC System when
the room temperature exceeds 30°C (or
86°F) in order to avoid an elevated airflow
temperature.
• Always connect-disconnect the breathing
tube from the humidifier and mask by using
the grips on the cuffs, in order to avoid
damage to the breathing tube
• Do not pull the tube when disengaging the
tube from the humidifier.
Cleaning:
• Do not heat or sterilize the Hybernite Heated
Breathing Tube.
• Do not use harsh soaps, aggressive
detergents, solvents or alcohols to clean the
breathing tube.
• Do not use a dishwasher to clean the Heated
Breathing Tube.
• Do not use brushes or objects to clean the
inside of the Heated Breathing Tube as it may
damage the tubing.
• Do not use (microwave) ovens, fans or
any other appliances to dry the Heated
Breathing Tube after washing. See cleaning
instructions.
• Only reassemble the system when the tube is
fully dry.
• Do not clean the power supply using water
or any other liquid.
• Do not place or drop the Hybernite power
supply into water or other liquid.
• If the Hybernite power supply does fall in
water, do not attempt to retrieve it. Unplug
the power supply immediately.
General Handling
• Do not use the heated breathing tube longer
than 12 months under any circumstances.
• Replace the breathing tube immediately when
damaged, and as often as recommended by
your physician or respiratory therapist.
• If the breathing tube is damaged (having
holes, kinks, tears, exposed heating wires,
etc.) or not functional, do not try to repair
the breathing tube yourself. Immediately
replace your heated tube.
• Immediately replace your power supply
when the power cord, lead or connectors are
damaged.
• Only use replacement parts (Heated
Breathing Tube, power supply) recommended
by Plastiflex Healthcare for your Hybernite
Rainout Control System.
• Only use the Hybernite Heated Breathing
Tube with the included power supply. Do
not use with any other power source.
• Do not disassemble or intentionally damage
the Heated Breathing Tube.
• Do not insert or drop any object in the
opening of the Heated Breathing Tube.
• Do not place materials or objects on the tube
as it can damage the Heated Breathing Tube.
• Dispose of the tube correctly according to
your local government regulation.
• Upon permanent disposal, mark the tube so
that it is not aused by any other patient.
Power Supply:
• Do not use the Hybernite V12 Power supply
in an oxygen enriched environment.
• Do not use the Hybernite V12 Power supply
in an area with anesthetic gases.
• Disconnect the Hybernite V12 Power
supply in case of problems, maintenance or
cleaning.
• Do not use the Hybernite V12 Power supply
at height higher than 2000m above sea level.
General:
• US Federal law restricts this device to sale by
or on the order of a physician
• Retain these instructions for use for future
reference.
• When using electrical products, always
follow usual safety precautions.
• The Hybernite Heated Breathing Tube is for
single patient use only.