ORDER
NO.
422
RECEIVER
PRE -AMP
INSTALLATION
&
OPERATION
INSTRUCTIONS
HV-GAIN
ELECTRONICS
CORPORATION
Rural Route 3
Lincoln, Nebraska
68505
SECTION I
DESCRI PTION
The Hy-Gain model 422 Receiver Pre-Amp is designed for
use with any Citizens
Band Transceiver.
It will
improve
the weak signal performance of the receiver section.
The
Receive Pre-Amp uses a Metal Oxide Semiconductor Dual
Gate Field
Effect
Transi stor (MOSFET) in the ampl ifier
section.
The input and output is diode protected.
The
model 422 also has provision for an extra auxiliary
receiv-
er, a dual AC outlet and an ON-THE-AIR indicator
which
automatically
lights up during transmit.
The Tuning Con-
trol
is useful for peaking the received signal on anyone
of the 23 channels available for C.B. use.
.
..-.,
SECTION II
UNPACKING
Carefully
remove the Receiver Pre-Amp from the packing
carton.
Examine it closely
for signs of shipping damage.
This equipment has been carefully
packed for safe arrival
IF PROPERLYHANDLED EN ROUTE.
The responsibility
for safe delivery
rests with the carrier.
The responsibility
in obtaining
reimbursement for damage
rests with YOU.
Prompt action on your part will
speed
adjustments.
Our warranty in no way covers malfunction
or damage which
is a result
of improper handl ing by a
~arrier.
Under no circumstances
should you return mer-
Frequency
All C. B. chan nel s
Gain
'"
Variable up to 20 db (3 'S' points)
Input Drive
Maximum inp'Jt drive from
transcerver is 5 watts
chandise to your dealer before instigating
the necessary
forms.
To do so can jeopardize
your investment and the
costs of necessary repairs may be a burden you will have
to assume.
Fi II out the enclosed Warranty Registration Card and mai I
to insure your warranty will be on file.
Save the carton and packi ng materi al.
You may need it at
a later date for storage or shipment.
