HWg-PWR 3 / 12 / 25 MANUAL
HW group
September 2013
page 14
Activating and adding discovered meters to HWg-PWR
1.
In the Device menu, select the desired meter. The
Edit xMeter
section displays.
2.
Turn on the meter in the system (change
Enable
to
Enable
).
3.
Click
Save
to save your changes.
4.
The
PRI Address
,
SEC
Address
,
Medium
and
Manufacturer
fields are retrieved
automatically and displayed when the page is refreshed.
5.
The
Use Address
option configures the addressing mode (
Primary
– shorter primary M-
Bus address;
Secondary
– unique secondary address). For battery-powered meters, we
recommend to use the primary address.
6.
Meters of the same type and by the same manufacturer are often supplied with the
same Primary address, which therefore cannot be used for addressing. The
PRI address
field allows changing the primary address – useful for battery-powered meters.
7.
The
Name
field allows assigning a custom name to the meter (Home, Office, RACK1,
etc.)
8.
Meter M-Bus Read period
sets the interval for reading out the values from the meter.
The default is 30s. For battery-powered meters, it might be advisable to set a longer
period. For details, see
Meter types
.
9.
Now select the
Scan Value
submenu of the corresponding meter (from the menu).
10.
A list of values provided by the meter is displayed. Individual values can be turned on
(
Enable
) and off (
Disable
):
Содержание HWg-PWR 12
Страница 1: ...HWg PWR 3 12 25 MANUAL...
Страница 42: ...HWg PWR 3 12 25 MANUAL HW group September 2013 page 42 Mechanical...
Страница 43: ...HWg PWR 3 12 25 MANUAL HW group September 2013 page 43...
