Damocles2
Ares LTE
11
General
Advanced settings
Advanced settings are enabled by pressing the
Advanced Mode
button.
This tab gives information about sensors and digital inputs, together with graphical symbols
for quick overview.
•
Device name
– useful for sorting in higher-level systems, or to tell apart several Ares units.
•
Temperature Unit
– units used to work with temperature. The temperature unit changes about
5 seconds after pressing
Save
.
•
Celsius
– °C
•
Kelvin
– K
•
Fahrenheit
– °F
•
Current Time
– informs about the current system time set in the device. The time appears in
the log of measured values.
•
Last Sync. Time
– date and time of last time synchronization over the internet. Useful for chec-
king if the time synchronization works.
•
Modem status
– information about the current modem status and readiness:
•
SIM unplugged
– no SIM was found. Insert a SIM, or clean its contact pads.
•
Modem initializing...
– modem is being initialized. The device is establishing communication
with the modem and making the modem ready for operation. This information should not
appear for more than 10 s. Otherwise, it indicates a modem fault (see
Troubleshooting
).
•
Invalid PIN
– PIN code stored in the Ares LTE unit is incorrect.
•
PUK requested
– PUK code is needed (must be entered in a different kind of device).
•
Ready to use
– modem is registered to the carrier's network and ready for operation.
Advanced settings
Содержание Ares 10 LTE
Страница 1: ...Ares 10 12 LTE User manual...
