05
5-13
Information
•
In cold and wet climates, door lock
and door mechanisms may not work
properly due to freezing conditions.
•
If the door is locked/unlocked multiple
times in rapid succession with either
the vehicle key or door lock switch, the
system may stop operating temporarily
in order to protect the circuit and
prevent damage to system components.
•
Two press unlock setting can be
changed in the User Settings mode on
the cluster.
Operating Door Locks from
Inside the Vehicle
With the door lock button
OQXI049006
•
To unlock a door, push the door lock
button (1) to the “Unlock” position.
•
To lock a door, push the door lock
button (1) to the “Lock” position.
•
To open a door, pull the door handle
(2) outward.
•
If the inner door handle of either
the driver door or passenger door
is pulled when the door lock button
is in the lock position, the button is
unlocked and the door will open.
•
For Key Start Vehicles (w/Remote Key)
The front doors cannot be locked if
the remote key is in the ignition switch
and either of the front doors are open.
•
For Push Button Start Vehicles (Smart
Key)
The doors cannot be locked if the
smart key fob is inside the vehicle and
any of the doors are open.
Information
If a power door lock ever fails to function
while you are in the vehicle try one or
more of the following techniques to exit:
•
Operate the door unlock feature
repeatedly (both electronic and
manual) while simultaneously pulling
on the door handle.
•
Operate the other door locks and
handles, front and rear.
•
Lower a front window and use the
mechanical key to unlock the door from
outside.
