Huvitz HOCT-1, Руководство пользователя

Страница: 128 / 155

128
3.6.8
Angiography Analysis screen (Optional)
Angio OCT module is available as an upgrade to the SOCT system.
Angio can be used to detect flow within ocular tissue. The algorithm uses the variation information in the repeated B-
scans to detect locations of flow within ocular tissue. The Angio scan protocol create a 3D scan data set, that combines
the results of repeated B-scans. The Angio mode graphically represents the results giving by OCT images that contrast
areas of flow and static tissue. The Angio scan which constructs angiography OCTA data is acquired by predefined A-
scans and predefined B-scans. User can change the number of A-scan and B-scan in User Setup menu.
1. Going into Confirmation Screen
(1) If pressing ‘ANALYZE’ buton, Angiography Analysis is started.
(Refer ‘4.2.1. OCT/Fundus mode – Confirmation screen’ for uncommented item)
(2) After selecting one of Angiography examination, then press ‘ANALYZE’ to start Angiography Analysis.