Huvema HU 331 DGH, Руководство пользователя, Страница: 16 / 36

16
CHANGES AND T YPING ERRORS RESERVED CHANGES AND T YPING ERRORS RESERVED CHANGES AND T YPING ERRORS RESERVED
12
7.7 Special maintenance
Special maintenance must be conducted by skilled
personnel. We advise contacting your nearest
dealer and/or importer. Other protective and
safety equipment, devices (of the reducer), the
motor, the motor pump, and other electrical
components also require special maintenance.
7.8 Changing gear oil
The gear box requires periodic changing of oil.
The oil must be changed by the first 6 months of a
new machine and every year thereafter.
- Change the gearbox oil. (Gear oil # 90)
- Disconnect the machine from the power source.
- Raise the saw arm to vertical position
- Release the drain hold (R) to draw off gear oil by
- loosening the hex head screw (S).
- open fill hole (T) by releasing hex head screw (U)
- Replace the screw (S) after oil completely flows
off.
- Replace hole using the fill hole (T).
- Replace hex head screw (U)
8 TECHNICAL CHARACTERISTICS
8.1 Table of cutting capacity and technical
details
ROUTINE AND SPECIAL MAINTENANCE CHART
Item Part Lubricant Quantity Routine Remark
1 Bench vise Machine oil Suitable Everyday Oil after cleaning
2 Movable vise slides Machine oil Suitable Everyday Oil after cleaning
3 Lubricant fluid tank
Water-soluble
cutting fluid
High level on
gauge
Everyday
4 Worm gear Grease Suitable
Every
month
5 Drive wheel oil hole Grease Suitable Two weeks
6 Idle wheel oil hole Grease Suitable Two weeks
7 Slide of slide seat Machine oil Suitable Two weeks
8 Transmission gear box Gear oil # 90
Middle level on
gauge
Six months
Every year after
the first
9 Hydraulic system tank
Hydraulic Oil AW-
32
High level on
gauge
Six months
Every year after
the first
* Clean the chip from the flywheel housings and bench vise everyday to keep performance well.
Warning:
1. Disconnect the machine form the power source before any kind of maintenance.
2. Any special maintenance must contact skill personnel of dealer or importer. Do not remove parts for
maintenance.
T, U
R, S