Huvema HU 250 CS, Руководство пользователя

Страница: 9 / 20

9
CHANGES AND T YPING ERRORS RESERVED CHANGES AND T YPING ERRORS RESERVED CHANGES AND T YPING ERRORS RESERVED
7. T
rouble sHooTinG
Trouble Possible cause Remedy
Excessive bouncing or breaking of
the saw
1. Speed an/or saw feed too high.
2. Teeth blunt, tooth cavities too small.
3. Wrong coolant
4. Saw jolts because chipsremain in the
saw cavity (cold-welding on the saw).
5. Saw installed incorrectly with respect
to the direction of rotation.
6. Worm and worm wheelworn out.
Use Bewo Oil S
Have the saw ground and the tooth cavity
polished, so that the chips can easily slide
through the toothcavity. Turn the saw and
check the teeth.
Replace.
Motor does not turn 1. Motor incorrectly connected.
2. Relays or motor defective.
3. Selector switch is in the OFF position
4. Thermal protection of motor defective
5. Fuses blown
6. Emergency stop button depressed
Cooling system does notwork 1. Cock on saw guard inclosed position.
2. Pump incorrectly connected.
3. Pump defective
4. Cooling tank empty
5. Suction pipe of cooling pump
obstructed.
8. s
urvey of available saw blades
Saw blades HSS DMO5, steam passivated
Material Dim. (mm) Pitch
Steel 250x2x32 3/240 teeth
250x2x32 4/200 teeth
250x2x32 5/160 teeth
250x2x32 6/128 teeth
250x2x32 8/100 teeth
250x2x32 10/72 teeth
250x2x32 12/60 teeth
Stainless steel 250x2x32 3/240 teeth
250x2x32 4/200 teeth
250x2x32 5/160 teeth
250x2x32 6/128 teeth
250x2x32 8/100 teeth
250x2x32 10/72 teeth
250x2x32 12/60 teeth
Available on request:
Special saw blades for aluminium, brass and copper