Huvema HU 055, Руководство пользователя

Страница: 4 / 11

4
CHANGES AND TYPOGRAPHICAL ERRORS
2. A
dditional safety requirements
Always remember that:
1. in the case of maintenance and repair work, the machinery must be "OFF" and stress-free ,
2. tensioned workpieces may only be measured when the machine is switched off .
Do not hang over the machine, pay attention to loose clothes, ties, shirt sleeves, jewelry
etc. and wear a hairnet. Do not remove protections or protective caps from the machine (never work with an open
protective cap). When working with coarse material, safety glasses must be used. Blackberries should only be
removed with a hand sweeper, never do this with your hands. Never leave the machine unattended.
Always wear safety glasses!
3. T
echnical specification
Model C D H G B W L M N weight Packing size
HU -107 100 60 40 1 0 75 102 485 270 300 38kg 550x400x440
Motor External grinding Internal grinding
Grinder swing
on lathe
Model Power Voltage Pole Size of wheel
diaxwidthxbore
(mm)
(RPM) No
non-
load speed
60hz 50hz
Size of wheel
diaxwidthxbore
(mm)
(RPM) No
non- load
speed
60hz 50hz
Grinding
depth
standard
HU -107 0,75kW 400V 2P 180x19x31,75 3300 2 750 38x20x8
18000
12000
16800
11600
110mm 457-762mm
Model HU -107
Speed RPM 2750 rev/min
Grinding stone 180 x 19 x 31,75mm
Dimensions l x w x h 485 x 300 x 270 mm
Power 0,75 kW
Weight 38 kg
Voltage 3x 400 V
HU - 055
3 750 rev/min
125 x 19 x 41,27 mm
442 x 286 x 2 1 0 mm
0, 37 kW
26 kg
3x 400 V
HU - 055 90 50 40 1 0 75 102 440 240 290 26kg 500x380x340
HU - 055 0, 37 kW 400V 2P 1 25 x19x 4 1, 2 7 4500 3750 25 x 16 x 6
23 000
1 65 00
19000
13700
9 0mm 330 - 508 mm