Huvema HU 055, Руководство пользователя

Страница: 3 / 11

3
WIJZIGINGEN EN TYPEFOUTEN VOORBEHOUDEN
T
ool post grinder - HU 107 & HU 055
1. G
eneral safety requirements
N.B.: Read the manual carefully to avoid problems.
As with all machines, this machine also involves hazards during the execution of work. Proper operation reduces these
risks. In the event of non-compliance with safety regulations, risks are unavoidable. Please comply with the general
safety regulations, as applicable.
The construction of the machine may not be changed in any way. If this nevertheless happens, this is entirely at
the user's own risk.
1. Read the manual carefully before working with the machine .
2. Keep or do not remove protections etc. in place .
3. Electrically powered machines equipped with a plug should always be connected to a grounded socket.
4. Loose levers or actuators should always be removed. Make it a habit to always check the machine before
use.
5. Keep the workplace clean. A cluttered workplace increases risk.
6. The machinery must not be set up in a hazardous environment, i.e. not in damp or wet rooms. Also, do
not expose the machine to rain. Provide good lighting in the workplace.
7. Keep children and unauthorized persons away from the machine. They must always be kept at a safe
distance from the machinery.
8. Make sure that the workshop cannot be entered by unauthorized persons. Install safety locks in the form
of sliding locks, lockable main switches, etc.
9. The machine should never be overloaded. The capacity of the machine is greatest when it is loaded in
the right way.
10. Use the machine only for the work for which it was made.
11. Wear the right work clothes. Do not wear loose clothes, gloves, nickers, rings, necklaces,
bracelets or jewellery. These can grip in rotating parts. Wear footwear with rubber soles. Wear
a hairnet in case of long hair.
12. Always wear safety glasses and proceed according to the safety regulations. For dusty work, a
dust mask is advisable.
13. Always fasten workpieces well by means of a machine clamp or a tensioning device. This keeps both hands
free for the operation of the machine.
14. Keep your balance at all times .
15. Always keep the machine in optimal condition. To do this, keep the cutting surfaces sharp and clean.
Read the manual carefully and follow the instructions for cleaning, lubricating and changing
tools.
16. Before commissioning, it must be ensured that the oil reservoirs are sufficiently filled !
17. Unplug the power cord from the power outlet before performing maintenance work or replacement of
parts on the machine.
18. Only use the prescribed accessories. See manual. The use of improper accessories may entail certain risks.
1. Make sure that the machine cannot start suddenly. Always check that the on/off switch is set to OFF.
19. Never stand on the machine or tool. The machine may fall over or come into contact with the
cutting tool.
20. Check for damaged parts. If there are damaged parts, you must replace or repair them
immediately.
21. Never leave the machine unattended while it is running. Always switch off the machine, but only after it has
come to a complete stop.
22. Alcohol, drugs, drugs. The machine should never be operated when you are under the influence of
these agents.
23. Make sure that the machine is voltage-free before carrying out work on the electrical equipment,
motor, etc.
24. Keep original packaging due to transport or relocation of the machine.
25. Machinery must not be used if protective caps or other safety devices have been removed. If protective
caps are removed during transport (e.g. during repair), you must reattach them correctly before
(re)commissioning of the machine.