HUSTLER TrimStar Скачать руководство пользователя страница 5

125360CE

1-1

REV A

CZ

DA

DE

EN

ES

FR

IT

NL

PT

SV

GENERAL INFORMATION

This manual applies to the following Hustler

®

 Turf Equip-

ment equipment lines:

Hustler

®

 TrimStar

®

To the New Owner

Hustler

®

 TrimStar

®

 mowers are designed to be used as 

lawn mowers, they must be used for mowing purposes only.

Hustler

®

 mower owners and operators 

must read

 this man-

ual carefully. It contains operation and maintenance informa-
tion that will help you achieve years of dependable service.

The Engine Owner’s Manual, included in the owner’s 

packet, contains engine information that will not be repeated 
in this manual. 

The 

owner’s responsibilities

 include, but are not limited to, 

making certain that the operators and mechanics:

read and understand the engine owner’s manual 
before attempting to operate or repair the engine.

read and understand the mower’s operator manual and 
all decals before operating this machine.

are qualified and physically able individuals, properly 
trained in the operation and maintenance of this 
equipment. Before they are allowed to operate or 
maintain this machine, they 

must

 be familiar with its 

safe operation, operator controls, and decals.

know they are responsible for their own safety as well 
as the safety of other persons within the vicinity. 

Remember,

 the operator is responsible for accidents 

or hazards occurring to other people or their property.

IMPORTANT:  

As the owner/operator you can prevent acci-

dents. You are responsible for accidents or injuries occurring 
to yourself, other people or property.

Never let children or untrained people operate or service 

the equipment. Local regulations may restrict the age of the 
operator.

For more detailed maintenance and adjustment informa-

tion refer to the proper 

General Service Manual

 for your 

machine. Refer to the 

Product Literature

 section of this man-

ual for information on how to obtain this manual.

Using This Manual

IMPORTANT:  

Any maintenance operation that requires 

the removal of safety covers 

must

 be performed by a trained 

service technician.

This manual contains general operation information as 

well as basic adjustment and maintenance information. 
Since operating conditions vary considerably, all conditions 
cannot be addressed individually. Through training and expe-
rience, operators should develop safe operating practices 
suitable to most conditions.

Directions used in this manual, for example RIGHT or LEFT, 

refer to directions when in the operator position and facing 
forward, unless otherwise stated.

Though current at the time of printing, photographs and 

illustrations shown may vary slightly from your mower due to 
subsequent production changes. Hustler

®

 Turf Equipment, 

Inc. reserves the right to redesign and change the machine 
as deemed necessary, without notification. If a change has 
been made to your machine which is not reflected in this 
manual, contact your Hustler

®

 

Dealer for current information.

Warranty Registration

To activate your warranty policy the mower 

must

 be 

registered, by your Dealer, with the Manufacturer of Hustler

®

Turf Equipment

 

within 

ten (10) days

 following the date of 

purchase. It is recommended that you contact your Dealer to 
make sure the mower is registered.

IMPORTANT:  

The mower and any attachment that 

displays a model and serial identification number plate 

must

be registered with Excel Industries, Inc., manufacturer of 
Hustler

®

 Turf Equipment, Inc (“Manufacturer”).

IMPORTANT:  

Any unauthorized modification, alteration, 

or use of non-approved attachments voids the warranty and 
releases Manufacturer from any liability arising from 
subsequent use of this equipment. 

Do not

 use or operate any 

attachment not approved by Hustler

®

 Turf Equipment, Inc.

IMPORTANT:  

Damage caused by unauthorized 

replacement parts is not covered by this warranty. 
Manufacturer expressly excludes liability for defects or 
damage caused by such 'unauthorized' articles or service.

Model and Serial Number

Mower model and serial numbers are found on the serial 

identification plate, located on the left side of the frame 
directly below the console support and behind the tire.

These numbers are required when the unit is registered 

with Hustler

®

 Turf Equipment. They will also assure you of 

the correct service parts when replacement becomes neces-
sary.

Содержание TrimStar















































Отзывы: