HUSTLER TrimStar, Руководство оператора, Страница: 22 / 46

REV A 3-4 125360CE
CZ
DA
DE
EN
ES
FR
IT
NL
PT
SV
IMPORTANT: Never operate the unit with the pump clutch
partially engaged. Make sure the clutch is completely
released and the chain has slack.
Moving the Mower With Stalled Engine
If it becomes necessary to move the unit when the engine
is inoperative, the transaxles are equipped with bypass
valves. Before moving the unit, pull out on the bypass valve
rods and slide them into the slot to lock in position.
Figure 3-8
Do not tow the machine. Move it by hand or use a winch to
load on a trailer for transporting.
When transporting on another vehicle, the unit must be
secured using the tie-down points. Figure 3-9
IMPORTANT: Always make certain the two bypass valves
are returned to their operating position before running the
unit following repairs.
A. Chain B. Slot
Figure 3-6
Figure 3-7
A
B
Spring Extension
137 mm – 163 mm
Right transaxle shown
A. Bypass valve rod (shown in operating position)
B. Slot
Figure 3-8
A. Tie-down point
Figure 3-9
B
A
A
A