10
Step 5
Figure #7 will show Step 5 procedures.
v
BEFORE BEGINNING NEXT STEP ENSURE THERE ARE TWO PEOPLE AVAILABLE TO DO WORK
•
Lift front glass and open until glass is at full extension
•
Once glass is fully extended gently push the glass clamp assembly
•
At the same time push up on mini top hardware to raise case arms
Step 6
Figure #7 will show Step 6 procedures.
• Insert stainless steel shims in the gap created
• Once done check glass alignment for correct position
• Once done tighten bolts in rear raceway on case arms
• Re-install arm cover and apply silicone sealer
• Re-install deck pans
• Re-install rear raceway cover
Installation (Cont'd)
Содержание CR3HV-F
Страница 3: ...3 Cut and Plan Views...
