wc_tx004558en.fm
31
MCT36-5 CN
Maintenance
1
Replace the paper element only.
2
These items should be serviced by your servicing dealer unless you have the proper tools.
5.3
Checking the Engine Oil
Check the engine oil level with the engine stopped and in a level position.
1. Remove the filler cap/dipstick
(a)
and wipe it clean.
2. Insert and remove the dipstick without screwing it into the filler neck
(b)
.
3. Check the oil level shown on the dipstick.
Note:
In the cross-sectional view in the graphic, the upper
(c)
and lower
(d)
oil
levels are noted.
4. If the oil level is low, fill to the edge of the oil filler hole with the recommended oil.
5. Screw in the filler cap/dipstick securely.
Drivetrain:
Clutch/pulley operation
Check
x
Spider plate assembly
Check
x
Lubricate
x
x
V-belt
Check
x
Blades
Check
x
Gearbox:
Gearbox oil
Check level
x
Check
x
x
Gearbox breathers
Check operation
x
x
x
x
Routine service intervals
Interval (months/hours)
Each use
1/20
3/100
6/200
9/300
12/400
wc_gr014552
a
b
c
d
Содержание Wacker Neuson MCT36-5
