Husqvarna Wacker Neuson MCT36-5 Скачать руководство пользователя | Manualshive

Страница: 3 / 52

background image

Foreword

wc_tx004555en.fm

3

Foreword

SAVE THESE INSTRUCTIONS—This manual contains important instructions for
the machine models below. These instructions have been written expressly by
Wacker Neuson Production Americas LLC and must be followed during
installation, operation, and maintenance of the machines.

Machine
identification

A nameplate listing the model number, item number, revision number, and serial
number is attached to this machine. The location of the nameplate is shown above.

Serial number
(S/N)

For future reference, record the serial number in the space provided below. You will
need the serial number when requesting parts or service for this machine.

Machine
documentation



From this point forward in this documentation, Wacker Neuson Machinery
(China) Co., Ltd. will be referred to as Wacker Neuson.



Keep a copy of the Operator’s Manual with the machine at all times.



For spare parts information, please see your Wacker Neuson Dealer or affiliate,
or visit the Wacker Neuson website at http://www.wackerneuson.com/.



When ordering parts or requesting service information, be prepared to provide
the machine model number, item number, revision number, and serial number.

Machine

Item Number

MCT36-5 CN

5100046362

wc_gr015063

Serial Number:

«
1
2
3
4
5
...
»

Содержание Wacker Neuson MCT36-5





















































Отзывы:

Нет отзывов

Похожие инструкции для Wacker Neuson MCT36-5

Бренд: Bartell Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды