Husqvarna Wacker Neuson MCT36-5 страница 7 Скачать руководство пользователя

Страница: 7 / 52

wc_si001081en.fm

MCT36-5 CN

Safety Information

1.1

Signal Words Used in this Manual

This manual contains DANGER, WARNING, CAUTION,

NOTICE,

and NOTE

signal words which must be followed to reduce the possibility of personal injury,
damage to the equipment, or improper service.

NOTICE:

Used without the safety alert symbol, NOTICE indicates a situation

which, if not avoided, could result in property damage.

Note:

A Note contains additional information important to a procedure.

This is the safety alert symbol. It is used to alert you to potential personal hazards.

►

Obey all safety messages that follow this symbol.

DANGER

DANGER indicates a hazardous situation which, if not avoided, will result in death

or serious injury.

►

To avoid death or serious injury from this type of hazard, obey all safety
messages that follow this signal word.

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result in

death or serious injury.

►

To avoid possible death or serious injury from this type of hazard, obey all safety
messages that follow this signal word.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, could result in

minor or moderate injury.

►

To avoid possible minor or moderate injury from this type of hazard, obey all
safety messages that follow this signal word.

Содержание Wacker Neuson MCT36-5





















































Результаты поиска

Содержание Wacker Neuson MCT36-5

Отзывы:

Похожие инструкции для Wacker Neuson MCT36-5

Бренды по названию

Популярные бренды

Husqvarna Wacker Neuson MCT36-5, Руководство оператора

Результаты поиска

Содержание Wacker Neuson MCT36-5

Отзывы:

Похожие инструкции для Wacker Neuson MCT36-5

Бренды по названию

Популярные бренды