Husqvarna TE 250, Руководство пользователя

Страница: 154 / 169

23 TECHNICAL DATA
152
Spring length 260 mm (10.24 in)
Gas pressure 10 bar (145 psi)
Static sag 37 mm (1.46 in)
Riding sag 110 mm (4.33 in)
Fitted length 477 mm (18.78 in)
Shock absorber fluid ( p. 156) SAE 2.5
23.9 Chassis tightening torques
Remaining screws, chassis EJOT PT
®
K60x25
‑
Z 1 Nm (0.7 lbf ft)
Screw, air filter box EJOT PT
®
K70x25 5 Nm (3.7 lbf ft)
Screw, fuel pump
EJOT PT ®
2.5 Nm (1.84 lbf ft)
Screw, intake air temperature sen-
sor
EJOT PT
®
K50x18 0.7 Nm (0.52 lbf ft)
Screw, oil fill level sensor G 3/4 " 7 Nm (5.2 lbf ft)
Screw, oil pump holder on oil tank EJOT PT 45x12-Z 0.7 Nm (0.52 lbf ft)
Screw, pressure regulator
EJOT PT ®
K60x25
‑
Z 2.3 Nm (1.7 lbf ft)
Screw, radiator hoses clip 2.4 Nm (1.77 lbf ft)
Nut, throttle cable on throttle
valve body
M4 3 Nm (2.2 lbf ft)
Screw, emergency OFF switch
(All EU/AR/CN standard models)
M4 0.4 Nm (0.3 lbf ft)
Screw, fixed grip M4 5 Nm (3.7 lbf ft)
Loctite
®
243™
Screw, stop button (All US stan-
dard models)
M4 0.4 Nm (0.3 lbf ft)
Screw, throttle valve body cover M4 2.6 Nm (1.92 lbf ft)
Screw, throttle valve body hose
clamp
M4 2.8 Nm (2.07 lbf ft)
Spoke nipple, front wheel M4.5 6 Nm (4.4 lbf ft)
Spoke nipple, rear wheel M4.5 6 Nm (4.4 lbf ft)
Remaining nuts, chassis M5 5 Nm (3.7 lbf ft)
Remaining screws, chassis M5 5 Nm (3.7 lbf ft)
Screw, battery terminal M5 2.5 Nm (1.84 lbf ft)
Screw, brake line guide for link
fork
M5 5 Nm (3.7 lbf ft)
Screw, frame protector M5 3 Nm (2.2 lbf ft)
Screw, ground wire in tail section M5 5 Nm (3.7 lbf ft)
Screw, shock absorber adjusting
ring
M5 5 Nm (3.7 lbf ft)
Nut, starter motor M6 4 Nm (3 lbf ft)
Remaining nuts, chassis M6 10 Nm (7.4 lbf ft)
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Screw, absorbing element on
frame
M6 6 Nm (4.4 lbf ft)
Screw, ball joint of push rod on
foot brake cylinder
M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, battery support bracket M6 6 Nm (4.4 lbf ft)