Husqvarna TC 85 2020, Руководство пользователя

Страница: 50 / 136

11 SERVICE WORK ON THE CHASSIS
48
S03427-10
–
Loosen screws
3
. Remove the left fork leg.
–
Loosen screws
4
. Remove the right fork leg.
11.6 Installing the fork legs
H02312-11
–
Position the fork legs.
Air bleeder screw
1
of the right fork leg is positioned to
the front.
Valve
A
of the left fork leg faces the front.
Info
The second milled groove (from the top) must be flush
with the upper edge of the upper triple clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
S03427-11
–
Tighten screws
2
.
Guideline
Screw, top triple
clamp M8 17 Nm (12.5 lbf ft)
–
Tighten screws
3
.
Guideline
Screw, bottom triple
clamp M8 15 Nm (11.1 lbf ft)
S03428-10
–
Connect the brake line at the start number plate.
H00935-15
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease shaft seal rings
4
and contact
surfaces
B
of the spacers.
Long-life grease ( p. 127)
–
Insert the spacers.