Husqvarna TC 50 2023 страница 56 Скачать руководство пользователя

Страница: 56 / 196

11 SERVICE WORK ON THE CHASSIS

11.15

Installing the fuel tank

Danger

Fire hazard

Fuel is highly flammable.

The fuel in the fuel tank expands when warm and can escape if overfilled.

–

Do not fuel the vehicle in the vicinity of open flames or lit cigarettes.

–

Switch off the engine for refueling.

–

Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.

–

If any fuel is spilled, wipe it off immediately.

–

Observe the specifications for refueling.

Warning

Danger of poisoning

Fuel is harmful to health.

–

Avoid skin, eye and clothing contact with fuel.

–

Immediately consult a doctor if you swallow fuel.

–

Do not inhale fuel vapors.

–

Rinse the affected area immediately with plenty of water in the event of contact with the skin.

–

Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.

–

Change your clothing if fuel spills on them.

–

Keep fuels correctly in a suitable canister, and out of the reach of children.

Main work

–

Check the throttle cable routing. (

p. 75)

K00664-11

–

Mount fuel hose

K00663-11

–

Position the fuel tank.

–

Make sure that no cables or throttle cables are trapped or

damaged.

–

Mount and tighten screw

Guideline

Remaining screws,

chassis

10 Nm (7.4 lbf ft)

–

Position the fuel tank breather in the steering stem.

Finishing work

–

Install the left side cover. (

p. 59)

–

Install the right side cover. (

p. 57)

–

Mount the seat. (

p. 62)

Содержание TC 50 2023





































































































































































































Результаты поиска

Содержание TC 50 2023

Отзывы:

Похожие инструкции для TC 50 2023

Бренды по названию

Популярные бренды

Husqvarna TC 50 2023, Руководство пользователя

Результаты поиска

Содержание TC 50 2023

Отзывы:

Похожие инструкции для TC 50 2023

Бренды по названию

Популярные бренды