![Husqvarna TC 125 2017 Скачать руководство пользователя страница 55](http://html.mh-extra.com/html/husqvarna/tc-125-2017/tc-125-2017_owners-manual_172700055.webp)
11 SERVICE WORK ON THE CHASSIS
53
H01540-01
–
Mount the chain.
–
Connect the chain with the connecting link.
Guideline
The closed side of the chain joint lock must face in the direction of travel.
H01545-10
–
Position the foot brake cylinder.
Push rod
engages in the foot brake cylinder.
The dust boot is correctly positioned.
–
Mount and tighten screws
.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
H01546-10
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
.
Guideline
Nut, linkage lever to angle lever
M14x1.5
80 Nm (59 lbf ft)
Info
Pay attention to flat area
.
–
Mount and tighten screw
.
Guideline
Screw, bottom shock
absorber
M10
60 Nm
(44.3 lbf ft)
Loctite
®
2701™
Info
Raise the wheel slightly to be able to mount the screw more easily.
H01536-11
–
Position the frame protectors on the left and right.
–
Mount and tighten screws
.
Guideline
Screw, frame protector
M5
3 Nm (2.2 lbf ft)
–
Mount and tighten screws
with the washers.
Guideline
Screw, frame protector
M5
3 Nm (2.2 lbf ft)
–
Mount the cable tie(s).
–
Check the free travel of the foot brake lever. (
Finishing work
–
Remove the motorcycle from the lift stand. (
11.20
Removing the seat
Preparatory work
–
Remove the air filter box cover. (
Содержание TC 125 2017
Страница 1: ...OWNER S MANUAL 2017 TC 125 TC 250 TX 300 Art no 3402094en ...
Страница 2: ......
Страница 44: ...10 TUNING THE CHASSIS 42 Finishing work Mount the handlebar cushion ...