Husqvarna R 316TsX, Руководство оператора

Страница: 30 / 37

Symbol Name
Indication on the
display
Sound Cause
Rotating blades indi-
cator
The symbol shows.
-
The drive of the blades is enga-
ged.
The symbol flashes. Incorrect start procedure. Refer
to
Start conditions on page 86
.
Parking brake indica-
tor
The symbol shows.
-
The parking brake engaged. Re-
fer to
To apply and release the
parking brake on page 93 .
The symbol flashes.
Incorrect start procedure. Refer
to
Start conditions on page 86
.
The symbol flashes
quickly.
Defective parking brake. Speak
to your Husqvarna servicing dea-
ler.
Operator presence
control (OPC) indica-
tor
The symbol flashes.
5 short
sounds.
The operator presence control is
disengaged when you try to start
the engine. Refer to
To start the
engine on page 91 .
The symbol flashes
quickly.
-
Defective operator presence con-
trol. Speak to your Husqvarna
servicing dealer.
Servicing indicator The symbol shows.
5 short
sounds.
Servicing is necessary. Speak to
your Husqvarna servicing dealer.
Low fuel level indica-
tor
The symbol shows.
1 short
sound.
Low fuel. Refer to
To fill fuel on
page 90
.
Bluetooth ® indicator
The symbol flashes.
-
The product is locked. Unlock
your product with Husqvarna
Connect.
Digital lock The symbol shows. -
Note: The look of the display can be different between
different models.
Transportation, storage and disposal
Transportation
• The product is heavy and can cause crush injuries.
Be careful when you load it onto or off a vehicle or
trailer.
• Use an approved trailer for transportation of the
product.
• Make sure that you have knowledge of local road
traffic regulations before transportation of the
product in a trailer or on roads.
To safely attach the product for transport
Before you attach the product, you must read and
understand the safety chapter. Refer to
Transport safety
on page 87 .
WARNING: The parking brake is not
sufficient to lock the product during
transport. Attach the product tightly to the
load area.
106 844 - 002 -