Husqvarna PP440HF, Руководство по ремонту, Страница: 99 / 165

10.3
99
REPAIR INSTRUCTIONS
1
3 4
Dismantling the Saw Head
Electronics
1� Loosen the four screws outside the
electric socket�
2� Loosen the four screws inside
the housing retaining the ground
frame�
3� Lift up the ground frame with the
three harting connectors in an
angle and pass them through the
socket� You may need to loosen
the ground wire from the frame
with a screwdriver as in Pic� 5�
4� Fold the two halves of the frame
outwards and press the harting
connectors down�
5� Unscrew the ground cable and
remove the frame�
6� Unscrew the 3 screws inside the
plug using an Allen key�
7� Use special tool 522 93 44-01 to
remove the cables� Insert it next to
the cable, press gently and pull the
cable out�
8� Remove the 4 screws and lift the
lid away�
2
First see: Remove Covers (p.
98)
5
7
6
8
Click
for 3D
steps